Ghost.exe For Dos

This document lists Ghost's command-line switches in alphabetical order. For more information on Ghost command-line switches, see the following documents:. For Symantec Ghost Solution Suite 3.x seeSwitches and hyphensWhen a switch is both preceded by and followed by a hyphen, such as with -NTC-, the second hyphen means that the feature is disabled. Such switches are normally not used without the second hyphen. For instance, -NTC- forces Ghost to disable the allocation of NTFS contiguous cluster runs.NTC is not used because Ghost enables the allocation of NTFS contiguous cluster runs by default.Switches and versions.

1. Ghost.exe For Dos Angeles

The version information is not complete. Some switches are not available in all versions.

Usually, a switch available in one version will also be available in later versions, but not always. Unless otherwise stated, most of the following switches are used on the Ghost command-line with Ghost.exe, Ghostpe.exe, or Ghostwks.exe.SwitchDescriptionGhost Version@filenameSpecifies a file that contains additional command-line switches that Symantec Ghost should read.

Filename indicates the path and file name of the command-line switch file. The command-line switch file can include any Symantec Ghost command-line switch. The Symantec Ghost command-line switch file must be a text file with each switch on a separate line.

This lets you exceed the DOS command-line limit of 150 characters.@Connect to. See the document.@MTxDesignates which tape device to use (0 through n).-#ENVDesignates the filename of your ENV file for registration.-DiagnosticReplaces the default abort error log file name,.txt, with the directory and file given in.Symantec Ghost 8.0Norton Ghost 2003Image fileAutomatically names spanned image files during creation. Using this switch avoids the user prompt that asks for confirmation of the next destination location for the of the image file that is being restored.This switch is the default behavior for Symantec Ghost.Symantec Ghost 8.0Norton Ghost 2003User interventionPrevents abort messages from waiting for user and removes user interaction prompts. The return value of.exe must to identify whether the operation was successful. Symantec Ghost returns 0 on success and 1 or higher on failure or error.Symantec Ghost 8.0Norton Ghost 2003-Bad diskHandles bad FAT clusters when writing to disk.

If this switch, and the target partition is FAT, Symantec Ghost checks for and works around bad sectors and.This option may slow Symantec Ghost operation substantially.Symantec Ghost 8.0Norton Ghost 2003Batch mode processingPrevents any GUI display with switches that do not require any user input, for example, the clone switch. Using this switch lets you execute Ghost operations on a computer with no video adapter.Symantec Ghost 8.0-Image fileSets the block size to K for writing to image files.Removed from Symantec Ghost 8.0.Clone / CD-R and CD-RW drivesWhen writing an image directly to a CD/DVD writer, this makes the CD/DVD bootable in drive A. If you use the -SURE switch with -, and a floppy disk is not in drive A, then a non-bootable CD/DVD.Symantec Ghost 8.0Norton Ghost 2003-NetworkGhost creates an image file using a buffer of size = number of KB. The default size of the buffer by Symantec Ghost.

The switch lets you override this size. You can set the buffer size value from 1 to 32.Symantec Ghost 8.0 Norton Ghost 2003-Image FileChecks the integrity of the image file that is indicated by the filename.Symantec Ghost 8.0 Norton Ghost 2003-CLONECloneGhost.exe operation switch. This switch allows automation of Ghost.exe operations and has a series of arguments that define the operation parameters.Symantec Ghost 8.0Norton Ghost 2003-CNSImage FileReverts the naming of spanned files to the system used by versions of Symantec Ghost prior to Symantec Ghost 6.5. If this switch is not used, then the naming of spanned files conforms to Microsoft application guidelines. You do not need to use this switch when reading an existing file. Use this switch when the first five characters in a file name must be unique.For example:With -CNS: (Allows you to save in long file name format.)This is a long file name.ghoThis is a long file name.001This is a long file name.002Without -CNS:Filename.ghoFilen001.ghsFilen002.ghsSymantec Ghost 8.0Norton Ghost 2003-CRC32CRC32 / Image verificationThis switch creates an image file with CRC values and then verifies the list against the original or a copy.

The purpose is to allow both quick listing of the contents of an image file and verification that a disk created by Symantec Ghost contains the same files as the original.Symantec Ghost 8.0Norton Ghost 2003-CRCIGNORECRC32 / Image verificationCRC errors indicate data corruption. This switch overrides CRC errordetection and may allow a corrupted image file to be used. Using this switch leaves the corrupted files in an unknown state. You can use this switch to help you extract files from a corrupted image file.Symantec Ghost 8.0Norton Ghost 2003-CVTAREAFAT partitionsCreates a file, Cvtarea.tmp, that is the location of the MFT when the FAT32 partition is converted to NTFS. This switch operates in a similar manner to the cvtarea program that Microsoft provides in Deploy.cab on the Windows XP installation CD.The file is created in the root directory of the partition during a partition or disk restore and is created as a contiguous space on the disk.

The largest size allowed is 4 GB. If the file is larger than this, it is truncated to 4 GB.Consult the Symantec Ghost Reference Guide for information on the syntax and default settings.Symantec Ghost 8.0Norton Ghost 2003-DDDiagnosticDumps disk metrics information to the dump log file, Ghststat.txt. The file location can be altered using the -dfile=filename switch.Symantec Ghost 8.0Norton Ghost 2003-DFILE=filenameDiagnosticChanges the path and file name of the dump log file created using the -dd switch.Symantec Ghost 8.0Norton Ghost 2003-DIDiagnosticDisplay diagnostics.-DL=numberDisk AccessSpecifies the number of hard disks present.

Valid numbers are between 1 and 8. This may help when the BIOS does not report the number of drives correctly.Use this switch in the following circumstances:. When Ghost does not detect a fixed disk. Use the -DL switch to force Ghost to detect fixed disks that are on higher numbered slots.

To search all slots, use ghost -DL=255. When Ghost stops responding immediately after starting Ghost.

This may be due to problems with higher slot numbers. Use -DL with values less then 146.

The lowest usable value would be 127 plus the number of physical drives on the computer. For instance, if the computer has 2 drives, the command would be: ghost -DL=129.Symantec Ghost 8.0Norton Ghost 2003-DLIST=drivesDisk AccessSpecifies a list of drives to search for span files. If a span file cannot be found, then the drive letters in dlist are substituted one by one to look for the file on other drives.For example, the command ghost -dlist=CDEFG instructs Norton Ghost to look for files on C, D, E, F, and G drives.

Ghost.exe For Dos Angeles

The path remains the same.Symantec Ghost 8.0Norton Ghost 2003DSTCloneUsed as a parameter with the -CLONE switch. Defines the location of the destination partition, disk, or image file. See the document.-F32FAT partitionsLets Symantec Ghost convert all FAT16 volumes to FAT32 volumes when the destination partition to convert is larger than 256 MB in size. Ensure that the installed operating systems can access the volumes that will be converted to support FAT32.Symantec Ghost 8.0Norton Ghost 2003-F64FAT partitionsLets Symantec Ghost resize FAT16 partitions to be larger than 2047 MB using 64 KB clusters. This is only supported by Windows NT and Windows 2000. Do not use on computers with other operating systems.Symantec Ghost 8.0Norton Ghost 2003-FATLIMITFAT partitionsLimits the size of FAT16 partitions to 2047 MB. Useful when Windows NT FAT16 partitions are present on the disk and 64 KB clusters are not wanted.Symantec Ghost 8.0Norton Ghost 2003-FCRCRC32 / Image verificationCreates a CRC file, Ghost.crc, while making an image file.

This is the same CRC file that is created when using one of the create actions on the -CRC32 switch.Symantec Ghost 8.0Norton Ghost 2003-FDCForces Ghost to check for a dongle. In Ghost versions prior to 2.09, Ghost automatically checked for a dongle.Removed from Symantec Ghost 8.0-FDSPCloneForce Disk Signature Preserve. Use to resolve bootup failures after cloning a disk on a Windows 2000/XP computer, especially when the disk and controller are the same in the source and destination computers, but the partition sizes or layout are different. This switch preserves the signature bytes on the destination disk when performing a disk-to-disk or image-to-disk cloning operation.

This switch prevents Ghost from automatically forcing a disk initialization, which Ghost does by default when imaging a Windows 2000/XP disk.Symantec Ghost 8.0Norton Ghost 2003-FDSZCloneForce Disk Signature to Zero. Use to resolve bootup failures after cloning a partition on a Windows 2000/XP computer, especially when the disk and controller are the same in the source and destination computers, but the partition sizes or layout are different.